NUST entry test NET contains most of the Physics MCQs. FSC Part 1 physics book MCQs. HSSC physics questions MCQs. Solved Chapterwise physics MCQs for first-year 11 class MCQs. Second-year and first-year physic textbooks chapter-wise MCQs with the answer are provided here. PakLearningSpot PLS MCQs Bank website for FREE Entry test preparations
PLS Boost Bundle
Get Access to 20 thousands+ MCQs Including Topical MCQs, Practice Tests, Mock Tests, Solved Past Papers, Flashcards, Notes, FLPS, and Much More.
A thin horizontal plate of area 0.036 m2 is beneath the surface of a liquid of density 930 kg m−3. The force on one side of the plate due to the pressure of the liquid is 290 N. What is the depth of the plate beneath the surface of the liquid?
ETEA 2018
Physics
Fluid Dynamics
Elimination Tool:
If each particle of fluid is passing through the same point, what would be the flow?
NUMS 2016
Physics
Fluid Dynamics
Elimination Tool:
If the radii of two droplets are in the ratio 2:3, what will be the ratio of their Terminal velocities?
For the horizontal pipe, the fluid inside it is flowing horizontally then Bernoulli’s
equation can be written as
UHS 2014
Physics
Fluid Dynamics
Elimination Tool:
Two sample of gases ‘1’ and ‘2’ are taken at same temperature and pressure
but the ratio of number of their volume is V1
:V2 = 2:3. What is the ratio of the
number of moles of the gas sample?
UHS 2015
Physics
Fluid Dynamics
Elimination Tool:
Stokes’ Law for steady motion in a fluid of infinite extent is given by:
UHS 2012
Physics
Fluid Dynamics
Elimination Tool:
The viscous drag on small spherical body (moving with slow speed v) is propotional to
ETEA 2019
Physics
Fluid Dynamics
Elimination Tool:
A maintenance crew is working on a section of a three-lane highway with only one lane open to traffic. This result is much slower traffic flow. The cars on this highway behave like:
NUMS 2015
Physics
Fluid Dynamics
Elimination Tool:
Mass flow per second of the fluid is given by:
UHS 2015
Physics
Fluid Dynamics
Elimination Tool:
If 500 cm3 of gas, having a pressure of 760 millimeters of mercury, is compressed into a volume of 300 cm3. If the temperature remains constant, the pressure of the gas will be, in millimeters of mercury, approximately:
NTS 2017
Physics
Fluid Dynamics
Elimination Tool:
When the drag force is equal to the weight of the droplet, the droplet will fall with:
UHS 2011
Physics
Fluid Dynamics
Elimination Tool:
The product of cross-sectional area of the pipe and the fluid speed at any point along the pipe:
UHS 2013
Physics
Fluid Dynamics
Elimination Tool:
A small leak is developed in a large water storage tank. If the height of water above the leakage is 10 m, then find the speed of efflux through the leak:
UHS 2013
Physics
Fluid Dynamics
Elimination Tool:
How much more thumb pressure must a nurse use to administer an injection with a hypodermic needle of inside diameter 0.30 mm compared to one with inside diameter 0.60 mm? Assume that the two needles have the same length and that the volume flow rate is the same in both cases.
NUMS 2015
Physics
Fluid Dynamics
Elimination Tool:
Root mean square velocity of a gas having pressure ‘P’ and density ‘ρ’ is given
by:
UHS 2015
Physics
Fluid Dynamics
Elimination Tool:
If the speed of efflux through a small hole in a large tank is 9.8 m/s. Find the height at the fluid above the hole:
UHS 2012
Physics
Fluid Dynamics
Elimination Tool:
Flow speed of the fluid through a non-uniform pipe increases from 1 m/sec to 3 m/sec. If change in P.E. is zero, then pressure difference between two points will be: (density of the fluid = 1000 kg/m3)
UHS 2012
Physics
Fluid Dynamics
Elimination Tool:
An object having spherical shape of radius ‘r’ experiences a retarding force F from a fluid of coefficient of viscosity ‘η’ when moving through the fluid with speed ‘v’. What is the ratio of retarding force to speed?
UHS 2011
Physics
Fluid Dynamics
Elimination Tool: